|
|
We Accept Company and Government Purchase Orders!
| Is this your first time buying with us? Because of the high-fraud nature of photo ID supplies and equipment, a bank wire transfer may be required. Government entities, large businesses and other well-known organizations may make purchases with a credit card. It is possible, upon placement of your order, that you may be contacted by one of our Customer Service Representatives. |
This item has been discontinued. For other alternatives, please check out our entire selection here: ID Card Printers And Identification badges
 |
|
Product Details
- Basic full-color printer, 300 dpi printing resolution.
- Up to 16.7 million colors available.
- Print speed for batch printing: 30 seconds per card / 120 single-sided cards per hour.
- Accepts up to 100 standard CR-80 PVC cards.
- Software Driver: Windows 95/98/Me/NT 4.0/2000/XP.
- Two MB total memory.
- One year limited printer warranty.
- One year print head warranty, if Fargo-approved card media is used.
- Works with a variety of Card Creation Software.
|
Technical Details
| Description |
100/240 VAC |
| Shipping Weight |
16 lbs. |
| Dimensions |
8.9"H x 13.1"W x 10.5"D
(226mmH x 333mmW x 267mmD) |
| Print Method |
Dye-sublimation/resin thermal transfer |
| Resolution |
300 dpi (11.8 dots/mm) |
| Colors |
Full Color |
| * Print Speed |
Approximately 30 seconds per card / 120 cards per hour (YMCKO)
Approximately 5 seconds per card / 720 cards per hour (K) |
| Accepted Standard Card Sizes |
Standard CR-80 Card: 2.125"W (54mm) x 3.375"L (85.6mm)
CR-79 Adhesive Back: (2.051"W (52.1mm) x 3.303"L (83.9mm) |
| Accepted Card Thickness |
.020" (20 mil) to .030" (30 mil)
(.508mm to .76mm) |
| Print Area |
Standard CR-80 Card edge-to-edge |
| Accepted Card Types |
PVC or Polyester cards with polished PVC finish; monochrome resin ribbon required for 100% polyester |
| Card Cartridge Capacity |
Accepts up to 100 standard CR-80 PVC cards |
| Output Hopper Card Capacity |
Attachable Card Output Hopper; 50 cards (.030" / .762mm) |
| Memory |
2 MB RAM |
| Software Drivers |
Windows 95/98/Me/NT 4.0/2000/XP |
| Encoding Options |
ISO Magnetic Stripe Encoding Module, high- or low-coercivity (specify when ordering), Tracks 1, 2, a |
| System Requirements |
IBM-PC or compatible, Windows 98/Me/2000/XP, Pentium® class 133MHz computer with 32MB of RAM or higher, 200MB free hard disk space or higher |
| Interface |
Centronics-type parallel, IEEE 1284 compliant |
| Operating Temperature |
65° F to 80° F (18°C to 27°C) |
| Electrical |
Emissions standards: FCC Class A, CRC c1374, Class A and TUV-EMC (IEC-801 -2, -3, -4; CISPR 22, Class B) CE, BSMI Safety standards: UL 1950, CSA, C2.2 and TUV-GS (IEC-950)
100-240 VAC, 1.3A |
| Warranty |
Printer - One year
Printhead - One year if Fargo-approved card media is used |
| Product Code |
IDE85662 |
| * Print speed will very depending on the amount of color coverage within a card design. The above print speeds represent a full-color, full-bleed design; designs with less color coverage will print faster. Print speed indicates an approximate batch print speed and is measured from the time a card feeds into the printer to the time it ejects from the printer. Print speeds do not include encoding time or the time needed for the PC to process the image. Process time is dependent of the size of the file, the CPU, amount of RAM and the amount of available resources at the time of the print. |
| Fargo Certified Supplies: Fargo Card Printer/Encoders require highly specialized media to function properly. To maximize printed card quality, durability and printer/encoder reliability, use only Fargo Certified Supplies. Fargo warranties are void, where not prohibited by law, when non-Fargo Certified Supplies are used. |
|
|
]