|
|
We Accept Company and Government Purchase Orders!
Why pay thousands upgrading to an entirely new machine when you can save by adding a control module to do the job? Discover the only programmable paper cutter on the market that can be upgraded. It offers the new modular control system. Simply plug your choice of EC module units into the 7228 and you have a variety of programmable features at your fingertips.
This item has been discontinued. For other alternatives, please check out our entire selection here: Programmable Stack Cutters / Electric & Hydraulic
 |
|
Product Details
- High-performance, power cutter with superior-quality blade.
- Precision-ground guide plates and solid-steel blade carrier.
- Simple blade change and adjustment, without removing covers.
- Automatic blade and clamp return.
- Precision-ground guide plates and solid-steel blade carrier.
- Removable clamp plate for increased accuracy, simply snaps into place. Two-position switch for setting clamp pressure.
- Foot pedal for checking cutting line or pre-clamping when necessary.
- Illuminated cutting line. Two guides on front table.
- Optional air table with 62 jets for front and rear tables. The air jets can be turned on and off by a main switch.
- Optional two side tables (shown on inset picture).
|
Technical Details
| Cutting width |
28" |
| Cutting height |
3" |
| Cutting length (behind knife) |
28 4/5" |
| Table length in front of knife |
18 1/5" |
| Narrow cut |
1 3/8" (3 1/2" with false clamp) |
| Clamp pressure |
Low - 1900 psi. High - 3800 psi. |
| Motor output |
Blade drive -2 hp; Clamp drive - 0.5 hp (low), 1.0 hp (high) |
| Power |
Dedicated 20 amp outlet. |
| Shipping Weight |
1624 lbs. (With air table - 1650 lbs.) |
| Back Gauge |
Yes |
| Variable Speed |
Yes |
| Air Table Included |
No |
Safety Features:
Light beam safety curtain on front table, transparent Lexan safety cover on rear table. Safety light beam that will stop all operations when interrupted. Knife and clamp will return to home position. Safety guards on rear table. Safety lock and key for blade control. Lockable main and emergency switch. Dual push button controls ensure safe, efficient performance. Transparent, unbreakable safety cover on rear table. Electromagnetic disk brake for instant blade stop. Low voltage controls.
EC1 Power Back Gauge Control with Variable Speed Control
Now equipped with a start button for easy calibration. Electronic hand wheel for back gauge adjustment. Variable speed back gauge adjustment. User-friendly self-diagnosis system. LED display offers measurement accuracy to within 1/1000". Digital measurement read-out for millimeters or inches, to 0.1 and 0.001 respectively. EC1 can be easily and economically replaced by EC3 to upgrade capabilities.
EC3 Fully Programmable Back Gauge Control
Same features as EC1. Easy-to-replace electronic plug-in control module. 20 programs, with memory for up to 16 steps each. 10-button key pad for easily presetting measurements. EJECT function ejects paper lift when making cuts that require turning the lift. DELETE and INSERT mode for program steps. Single function keys for one-step programming control. Integrated calculator for calculating odd sizes. Memory key for repeat cutting.
|
|
Store Hours: (Mountain - M-F)
Showroom: 8:00 am - 5:00 pm
Sales Office: 7:30 a.m. - 5:00 p.m.
|
[ Home
| About ABC Office
| Sitemap
| Contact Us
| Support & Troubleshooting
| All Major Credit Cards Welcome!
]
Site created and maintained by ABC Office. Pictures, intellectual content and text are Copyright and Trademark protected. Copyright © 1996 - 2012 American Binding Company, Inc.
